The ONE "falcon" balisong ORIGINAL DESIGN aluminum Butterfly Knife w/ BUSHINGS sharp 440C or Trainer, with either Blue, Silver, Purple or Black channel construction, and Zen Pin system. Finally an affordable, flipable Balisong the community can be proud of, now IN STOCK. Featured as one of S2G's highest quality butterfly knives.
Spreading our wings over big name balisong brands, don't let these fly by.... Very LIMITED QUANTITY !!
- ORIGINAL design (NOT a clone), made by "TheONE" a High End factory in China.
- Milled Aluminum (provides a delightful clickity clank sound, very unique) Black or Blue Handles: Channel construction (each handle is ONE SOLID PIECE)
- Beveled corners on the handles, with grippy pattern
- NO latch, made for flipping
- Zen Pins, crowned spine, T6/T8 hardware (little to no tap when tuned properly)
- PB (Phosphorus Bronze) Washers and large BUSHING system for an Ultra Smooth swing (Bushings are a small insert around the pivot screws, that separates the friction between 2 points of contact, instead of just 1... allowing for an even smoother swing)
- Razor Sharp High Quality 440C Stainless Steel, unique feather shape with a beautiful Satin finish
- Overall Length: 9.7" Closed Length: 5.76" Blade Length: 4.25"
-
Blade Thickness: 3mm Hardness: 58HRC Weight: 4.0oz
- Includes: Heavy Duty Nylon Sheath + spare hardware.
- Optional: Spare Training Blade (1.1oz) + additional set of spare hardware. Need threadlocker? CLICK HERE Need oil? CLICK HERE Replacement Hardware w/ Zen Pins CLICK HERE
"There is a reason why this is called this "theONE", superb quality without breaking the bank!"
ATTENTION:
Although these are made by a "clone factory", your support will help them lean more toward the direction of producing original designs vs clones. This is a beautiful start to many affordable models soon to arrive!
Please Note: You must read our DISCLAIMER before purchasing. Check your laws. Absolutely no sales to minors.
Skeptical. That's the best word to describe how I felt when I stumbled upon slash2gash a couple weeks back. I've been into balis for quite a while, I own 5 of the real versions of the clones sold here. Therein lies my problem....I love to flip, I'm not very good, and the real deal knives are all worth 2-3 times what I paid for them.
So I ordered the Falcon as my test run. If the knife was even usable, I'd consider trying out the clones.
I gotta tell you, I'm blown away. I ordered the live blade knife in purple and an extra trainer blade-only. Zero tap out of the package, the grind on the blade is super tight and very nicely done. I flipped for about 30 min and still no tap. I slapped on the trainer blade and as expected the bushings needed some adjustment. About 30 minutes and a little KPL Heavy, that I also ordered from Slash2Gash, and the trainer blade fits as well as any of the real deal blades on knives 10x the price. Zero tap and smooth at butter.
Quality is quality. This knife is the best non name brand bali I've ever handled. Slash2Gash is about to see a lot more of my name on their order list!
This is my third purchase from s2g and it seems that with each knife I purchase they keep upping the quality of the products being sold. This knife has no tap and is amazing for flipping. The live blade is lethal, but I think it helps with the learning experience. As always I cannot recommend this knife enough.
Just got it to today. Tolerances are perfect. I have so many balis I've acquired from s2g. I promise you will get a perfect knife or if there's a defect it's China's fault which is near perfect. Trust me Jeff yells at them too to correct them. No other site will do what s2g.You know usually when I use to buy from China damm there would always be cnc milling marks or scratches on the front.lol not a2g he's very talented so no play no tap, no rub, even swinging handles, and well centered. That's why I keep buying from here. Now I have a live blade. Oh yea I figured out why the balisong disent stay on your finger. Has nothing to do with aluminum. The live one it's a little handle bias as in it tilts towards the way of handle.but the trainer one is neutral balance. Also, when I used to collect, I never used the flip so I never knew what the term blade heavy when people say, handle bias or neutral balance. I'm gonna do a review when I have the time but it won't be like most videos. I wish I could be a full time promoter bc I'm good at it. Came fast too.
Sent by Copilot:
Here’s a summarized and rewritten version for your review:
Jeff emailed me saying he needed an extra day to swap the handles since he only had one silver handle and needed to tune it up. I decided to buy a blue live blade instead of just a trainer because I don’t have as much time as I used to. Although I mainly collected knives before, I’m now getting into flipping and practicing good habits with the trainer, which builds confidence.
Even after dropping the knife, the screws stayed in place thanks to the Vibra-Tite GEL Jeff provided. It’s less messy and easier to use since the zenith pin screws can back out. I used red Loctite on the zenith pin screws and blue on the pivot screws. If you have a stiff handle, apply pressure and work the washers around. To prevent the pivot from spinning, squeeze the handles while inserting the screw.
I’ve been flipping more and prefer knives around 4.0 to 4.2 oz, with 4oz to 5 oz. being my favorite for titanium handles. I noticed that titanium knives 3.9 oz and up tend to stick to your fingers more, while aluminum knives, even at 4.0 oz, feel too light and don’t stay on my fingers. My favorite is the Lizard, which I’ll be flipping after using the trainer. I prefer knives with fewer screws like the Rep, as they don’t back out even without Loctite.
I avoid expensive knives like the $425 Rick Hinderer balisong because any tap or blade rub would make me return it. However, with S2F, you don’t have to worry about tap, play, or tight tolerances if you use Loctite. Even after dropping it, the tolerances remain intact. That’s why I buy from S2G.When I see reviews mentioning orders from China, I always recommend S2g.com in the comments because Jeff deserves it. E+++. I won’t be buying aluminum handles anymore as they slip out of my hands.
So I used to collect both clones and authentic balisongs. I'm a picky dude. But I can tell you that all you have to do is leave notes for jeff and he will take care of you. He tuned this bali trainer so well that it's
1. Well centered
2. No handle play
3. Sharp
4. No tap
5. Extra hardware
6. Fast shipping.
7. No blade rub ( even a 425$ Rick hindered bali had blade rub that I once had. I sold it bc rub drives me crazy due to ocd.) Has even sway as well.
Flips so damm smoothly.
I'm gonna do a video review as well. Jeff answers any questions I have and always responds quick. Believe me when I say that he treats everyone with the upmost respect and cares 💯%. Look you could buy a squid trainer for 150$ plus or this for half of the price. He has a point with when he saids" you could pay more for a bali, but the quality won't get any better. I was watching our review for the benchmade necrosong bali. I swear that sometimes they put your stuff out for no reason. That's gonna run you $1000 plus and from watching a review. I'm telling you the guy was shaking the benchmade necrosong and it has a lot of blade Tap in it and the handles are a little bit loose. And there's not even bushings in there which amazes me about there QC SOMetimes. I don't have a problem with benchmade. It's just that sometimes their quality is not that great. They couldn't even put bushings or roller bearing washers on that expensive as knife. Plus the handles don't look like Anything good they look like cheap plastic. You're only paying for collectable value and the steel type. AT LEAst Jeff's balis and other knives have a great showmanship. Plus there's not there many screws to loctite. Thank you Jeff. Trust me like at my job, it's a private company. And we have to wait and I've never seen this before. Like 3 weeks to get a paycheck and we're supposed to be paid Weekly. And here's the crazy thing. Just because someone can own a business doesn't mean that they can run a business which would be my security job. Jeff owns a business and knows how to run a.Business with exceptional quality and awesome customer service. E+++++. JUST ASK QUESTIONS IF YOU HAVE ANY,LEAVE NOTES, AND MAKE A PURCHASE. Thanks
